1967-91 Chry 340-360 Black RPM Air-Gap Non-EGR Intake Man

Part Number: ED75763

US$612.95

Status: Preorder

EA (1)

Description

Description

Chrysler RPM Air-Gap Manifold 340/360/318 (non-EGR) - Black

RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Accepts 1975 and earlier waterneck only. No provision for exhaust heated chokes and no exhaust crossover. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Includes nitrous bosses. INSTALLATION NOTES: bull; Recommended intake gasket: Edelbrock # 7276, Fel-Pro # 1213, Chrysler # 4397642 (or equivalent) for 340 and 360 bull; Manifold height: A-4.9", B-5.8" bull; Carb pad height: 5.35" bull; Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use # 1481 or # 1843 throttle/transmission lever kit. bull; Port exit dimensions: .98" x 2.16" bull; 1979 and later rotary A/C compressor will not clear waterneck bull; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. bull; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.

Prop 65 Warning

Prop 65 Warning

WARNINGATTENTION CALIFORNIA RESIDENTS:
WARNING: This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.

Vendor

Vendor

Leadtime Estimate if Not in Stock
Ships In 10-14 Days
To top