1966-00 BB Chevy Satin Mark IV Satin Non-EGR RPM Air-Gap 2-0

Part Number: ED7561

US$438.95

Status: Preorder

EA (1)

Description

Description

BBC RPM Air-Gap 2-O Intake Manifold (non-EGR) - Satin

RPM Air-Gap 2-O intake manifold is designed for street 396-502 c.i.d. Chevy V8's with large oval-port cylinder heads (1975 and earlier) or Edelbrock Performer/Performer RPM heads. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street. For square bore carburetors only. Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro. No provision for exhaust heated chokes and no exhaust crossover. INSTALLATION NOTES: bull; Recommended intake gasket: Edelbrock # 7203 bull; Manifold height: A-4.45", B-6.0" bull; Carb pad height: 5.22" bull; Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use bracket # 8031 for 1972-78. bull; Port exit dimensions: 1.60" x 1.94" bull; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. bull; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.

Prop 65 Warning

Prop 65 Warning

WARNINGATTENTION CALIFORNIA RESIDENTS:
WARNING: This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.

Vendor

Vendor

Leadtime Estimate if Not in Stock
Ships In 10-14 Days
To top