1969-97 Ford 351W Performer RPM Camshaft & Lifter Kit

Part Number: ED7182

US$426.95

Status: Preorder

KT (1)

Description

Description

Performer RPM Camshaft amp; Lifter Kit for Ford 351W

Performer RPM Camshaft is designed for Ford 351W V-8 applications. This Edelbrock cam kit produced 400 HP amp; 412 ft-lbs. of torque when used with #7181 intake and #60259 cylinder heads on a 351W engine. The camshaft works well with high-performance street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.Camshaft Specifications: bull; Duration @ .050 Intake: 234 degrees bull; Duration @ .050 Exhaust: 244 degrees bull; Lift @ Valve Intake: .496; bull; Lift @ Valve Exhaust: .520; bull; Lobe Separation: 110 Degrees bull; Intake Centerline: 106 Degrees bull; Idle Vacuum @ 1000 RPM's: 11;

Prop 65 Warning

Prop 65 Warning

WARNINGATTENTION CALIFORNIA RESIDENTS:
WARNING: This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.

Vendor

Vendor

Leadtime Estimate if Not in Stock
Ships In 10-14 Days
To top