Performer RPM Pontiac Manifold (non-EGR) - Satin
Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's). Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications. INSTALLATION NOTES: bull; Recommended intake gasket: Edelbrock # 7280 bull; No provisions for OEM choke bull; OEM carb requires conversion to electric/manual choke bull; Carb recommendations: Edelbrock Thunder Series AVS, AVS2 or Performer Series 650-800 cfm. bull; For 1968-71 use Edelbrock # 8015 throttle bracket bull; Manifold height: 1-1/4" taller than stock, A-6.88", B-8.00" measured to engine block bull; Carb pad height: 7.45" bull; Port exit dimensions: 1.10" x 2.06" bull; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. bull; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.