Wilwood Master Cylinder - 1-1/8" Bore, Cast

Part Number: 260-8556

US$230.95

Status: In Stock

EA (1)

Description

Description

Wilwood’s Tandem Aluminum Master Cylinder is available in 4 bore sizes, 7/8”, 15/16" , 1.00” and 1.125”; and 3 finishes, plain, ball burnished and black e-coat. 7/8” & 15/16" bore master cylinders are designed primarily for manual applications and include a pushrod. The 1” bore can be used in manual and power assisted applications and does not come with a pushrod. The 1.125” bore is designed for use primarily with power brake applications, either from vacuum assist or hydraulic assist systems. They’re designed for mount flanges from 3.22” to 3.40”, common measurements for most domestic cars and trucks from the mid 1960s to present, and offer fluid outlet ports on both sides of the bore. The stroke is set at 1.10” with a volume ratio of 2:1 between the primary and secondary chambers. Machined from high-pressure die castings, each master cylinder weighs only 3lbs, a 75% wight savings over most cast iron OE type master cylinders. We also offer a our combination proportioning valve kit, which includes brackets and stainless lines specifically for use with these master cylinders, see PN 260-13190, or 220-13189 for retrofit kit.

Prop 65 Warning

Prop 65 Warning

WARNINGATTENTION CALIFORNIA RESIDENTS:
WARNING: This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.

Vendor

Vendor

Leadtime Estimate if Not in Stock
Ships In 7-10 Days
To top