The Ridetech Chevy and GMC C10 StrongArm system replaces OEM leafsprings entirely. They have designed several specific systems for late model full size and mini trucks. The rear C10 StrongArm system will lower your truck as much as 10" with fully deflated Shockwaves while improving handling and load capacity. Installation is completely Bolt-On installation with no welding or fabrication necessary. This kit is for the customer that wants a Bolt-On system with no fabrication or welding.
Features:
- Bolt-on installation, no welding required!
- Designed for use with Shockwaves or CoilOvers.
- Lowers vehicle up to 10".
- Engineered mounting hardware to maintain ground clearance, driveline angles, tire clearance and load capacities.
- Improves ride quality.
- Better overall handling.
- The front trailing arm cross member is designed to allow the exhaust to be run through it rather than under it providing additional ground clearance.
- The panhard bar mount has been relocated to optimize the bar length and angle for the lowered height. This helps keep the rear end centered in the truck and lowers the roll center to minimize body roll. They use R-Joints on both ends of the bar.
- The C-Notches are included with the kit and fit the frame rail. With the Ridetech StrongArm system, the drive line angles have been optimized for the lowered height.
- The StrongArm system includes new trailing arms for the guys with trailing arms that have rusted out. They include R-Joints at the front attachment.
- The panhard is adjustable so you can optimize your tire clearance at the new lowered height.
- Designed for use with Shockwaves or CoilOvers.
