Displays included with this instrument system:
Speedometer: 0-120/140/160 MPH analog depending upon application, 0-255 MPH/KPH digitally in message center.Tachometer: 0-8,000 analog, 0-9,990 digitally in message center.Oil Pressure: 0-80psi analog and digitally.Water Temp: 140-220°F analog, 0-300°F/ 0-150°C digitally in message center.Voltmeter: 0-17VDC analog and digitally.Fuel Level: Empty- Full analog. 0-99% digitally in message center.Also shown in the digital message center:
OdometerTrip Odometer (A&B)Resettable Service OdometerClockHour-meter0-60 MPH (0-100 KPH) timer¼ mile timer¼ mile speed displayHigh Speed recallHigh RPM recall
Various Indicators can also be displayed such as:
- Turn Signals High Beam Check Engine Parking Brake Cruise Control 4x4 (when equipped) displayed in message center. Wait to Start (when equipped) displayed in message center.
Automatic Transmission gear indicator is also included which will display the full name (ie: Park, Overdrive, etc.) of the current gear. Utilizing the gear position indicator will require the use of a Dakota Digital GSS-2000 (sold separately) sending unit. Dakota Digital instruments systems also include a Demonstration Mode which will cycle the instrument readouts while the vehicle is standing still. This is especially popular while the vehicle is on display at a show, event or simply displaying the instrument system. Metric conversions will cycle between MPH or KPH in the digital message center with the press of a button. Full metric analog instrument systems (KPH & Celsius) are not currently available. Necessary sensors included for oil pressure (1/8” NPT), Water Temp (1/8" with bushings for 1/4", 3/8", 1/2” NPT as well 12mm and 16mm for GM & LS applications) and speedometer pulse generator. Fuel level gauge can read either OEM sensor, or any aftermarket style currently available. A universal fuel level sender, SEN-06-1, can be purchased from Dakota Digital if necessary. Fully programmable speedometer for various tire sizes, rear-end gearing combinations, etc.Built-in illumination is activated as headlights/ parking lights are activated. The DIM-1 can be purchased from Dakota Digital to increase or decrease the brightness of the display. The DIM-1 is used in conjunction with your headlight switch Fully adjustable warning points alert the user of potential vehicle problems in the digital message center One-time user settable odometer. This is available only within the first 100 miles of operation. Once exceeded, the mileage can be reset by Dakota Digital at a charge of $20.
** Covered by a Limited Lifetime Warranty!