1960-64 Ford Complete Rack & Pinion Kit

Part Number: 8011410

Leadtime Estimate if Not in Stock
Will Call with Lead Time
US$2,200.00

Status: Preorder

KT (1)

Description

Description

1960-64 Ford Rack & Pinion Kit for Traditional Motors

This is a rear steer center take-off style rack and pinion with a ball center bar that exactly matches the center link of the stock suspension for the '60-'64 Fords. The rack & pinion comes mounted to a one piece mounting bracket that bolts up to the frame using the same holes that held up the steering box and idler arm.

This is designed to be used with Traditional FE Motors found in these cars, including the 332, and 352. This kit has been installed on vehicles with stock manifolds. Other Headers may work, but might require modification or another u-joint in the column linkage.

Kit Includes:

  • Rack & Pinion
  • Outer Tie Rod Ends
  • Mounting Bracket
  • Mounting Hardware
  • Steering Shaft Kit
  • Pump & Line Kit

Features:

  • Pinion Type / Size: 17mm DD
  • Amount of Travel: 6"
  • Turns Lock to Lock: 2.5 - 2.75 Turns
  • Pressure Port Size: 18mm - 6AN Banjo
  • Return Port Size: 16mm - 6AN Banjo
  • Pump Required: Low Flow / Pressure
  • Inner End Threads: 9/16"-18
  • Outer End threads: Included
  • Prop 65 Warning

    Prop 65 Warning

    WARNINGATTENTION CALIFORNIA RESIDENTS:
    WARNING: This store sells products that may contain chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. By ordering products for delivery into California, you acknowledge that you have received this warning. Please feel free to contact us should you have any questions. For more information, go to www.P65Warnings.ca.gov.
    To top