Since 1991 Tanks Inc has been retrofitting non EFI gas tanks with internal fuel pumps using their PA Series Fuel Pump Modules. This module can be used to put an internal fuel pump into your original gas tank that was not originally set up for an internal fuel pump.
This kit gives you everything that you need to install an internal fuel pump into most gas tanks. The PA Series fuel pump has a reservoir tray that eliminates fuel pump starvation that is common on non-baffled tanks. A properly installed internal fuel pump will essentially eliminate any issues that are common on external fuel pumps.
These "Tanks" fuel pump modules listed are capable of running anywhere from 40 to 100 PSI and they will deliver a varying amount of fuel (gallons per hour) depending on the pressure. We have recorded the GPH at 30, 40, and 60 PSI as a guide to finding the correct pump for your particular installation. In addition, you can use the following list as a general rule of thumb for some of the more common engine swaps. See below for Installation Instructions
Note: "TANKS" 35M, 37M, and U-T poly tanks do not require the "P" suffix.
Note: Our kits do not include pressure regulators.
Note: All flow rates are rated at 13.5 volts.
Note: Assembly requires a minimum tank depth of 6 inches.
Note: Maximum tank depth of 10.5 inches with no modification.
- You assemble to the depth of your tank and install
- All Metal Components are (Yellow Zinc Plated Steel)
- Reservoir Tray Included
- 1/4" NPT Supply Line
- 1/4" NPT Return Line
- Vent Opening
- In-Tank Wiring Harness
- Up to 100 PSI Rating
- Threaded In-Tank Mounting Ring
- Heavy Gauge Mounting Plate
- Adjustable Support Arm
- Genuine Walbro Fuel Pumps are supplied
Pump Flow Rates:
TBI 109 Liter Per Hour Pump
PA-2 Deluxe 190 Liter Per Hour Pump
- 54 GPH @ 40 PSI
- 50 GPH @ 50 PSI
- 48 GPH @ 60 PSI
PA-4 High Flow 250 Liter Per Hour Pump
- 68 GPH @ 40 PSI
- 65 GPH @ 50 PSI
- 62 GPH @ 60 PSI
PA-6 High Performance 440 Liter Per Hour Pump
- 106 GPH @ 40 PSI
- 99 GPH @ 50 PSI
- 91 GPH @ 60 PSI
NOTE: All Flow Rates Are At 13.5 Volts